Quickstart Guide
Relight Pro
Want to know how to use the Relight Pro correctly? Then follow our Quick Start Guide
User Manual
You can find the complete user manual here – everything you need to know for safe use.
Step 1:
Hang or place
Two ways, one result: Hang the panel on a door or wall – or place it in the stand. Choose what fits your space.
Option A: Hanging (Wall/Door)
- Screw the threaded pins into the top of the panel.
- Screw the cable holders onto the threaded pins.
- Hang the door hook over a standard-sized door.
- Connect the cable holders with the carabiner.
- Hang the other end of the cable directly onto the door hook.
- Adjust the height individually using the carabiner and cable clamp.
Option B: Stand
- Set up the stand at the desired position.
- Carefully place the panel between the two columns of the stand.
Preparation (both options)
- Securely set up the panel or mount it with one of the holders.
- Ensure the panel is securely fastened.
- Connect the panel to a power source.
- Put on the supplied safety goggles.
Step 2:
Glasses on, lights on
Is the panel securely mounted or standing, and is the cable plugged in? Then put on your safety goggles and flip the power switch on the back – the panel is ready.
! Important: Safety Goggles
Wear the provided safety goggles throughout the entire session and never look directly into the LEDs – this also applies to near-infrared light, which is invisible to the eye. A regular pair of sunglasses does not replace the provided safety goggles.
Step 3:
Choose program
Select the desired mode using the remote control or the touch panel on the side of the panel. Choose one of the nine preset programs – or create your own.
- Mode 1: Skin Boost
- Mode 2: Activation
- Mode 3: Deep Reset
- Mode 4: Reload
- Mode 5: Full Power
- Mode 6: Soft Reset
- Mode 7: My Routine
- Mode 8: Endurance Reset
- Mode 9: Full Evening Wind-down
Tip: Stand about 20–50 cm away from the panel for a full-body application. Movement is allowed – stretching or light exercise works just as well.
Step 4:
Set up, sit back, get started
Now adjust it to your needs – three controls, that's it:
- Brightness (10–100%): in 10% increments.
- Pulse frequency (0–100 Hz): 0 Hz = no pulse, 100 Hz = very fast pulse rate.
- Timer (1–90 minutes).
Ideally 10–30 minutes, 3–5 times a week, at a distance of 20–50 cm. More than 30 minutes doesn't add any benefit, and the light stays off overnight.
JOIN THE FRIENDS CLUB
Thanks to you and your friends, recovery gets twice as good.
- Sign up for the Friends Club and get your personal referral link.
- Your friends receive 15% off their first order at Reboots.
- Once your friend has checked in, you also get 15% off your next order.
FAQs
Wall mount or stand – which is better?
Both options work. The stand is quicker to set up and flexible in the room, while the door or wall mount saves space and can be adjusted in height using carabiners and a rope clamp.
Can I move during the application?
Yes. Full body in front of the panel while standing, distance about 20–50 cm – stretching, yoga poses, or light training work just as well.
Do I really need the safety glasses if I'm not looking into the light?
Yes. Near-infrared light is invisible to the eye, so the glasses remain on throughout the entire application. They do not replace regular sunglasses.
What is "My Routine"?
The mode where you set wavelength, intensity, and duration yourself and save it as a custom program. Accessible at the push of a button, starting from 10 minutes.
How many modes are there?
Nine pre-programmed plus "My Routine". The durations range from 15 to 30 minutes.
